TJ SWB: 5″ Pro LCG Long Arm Suspension System, High Steer & 9550 VSS Twin-Tube

$6,618.99

-

For ultimate rock crawling, trail riding, and high-speed stability, look no further than the TeraFlex Pro LCG Long Arm Suspension System. These kits are for the aggressive off-road enthusiast who wants the best suspension performance.

  • responsive handling
  • a Low Center-of-Gravity (LCG) Dependable performance
  • 5″ Lift = 37″ Tire Maximum off-road articulation combined
  • Rear Upper Pro LCG Triangulated 4-Link Control Arms improve steering response
  • reduce NVH compared to other long arm kits High Steer HD Adjustable Front Track Bar
  • shock load transferred through the LCG Long Control Arms LCG Long Arm Brackets are gusseted
  • Rubicon 44 (call for other axles) TeraFlex Limited Lifetime Warranty against defects High Steer System
  • 4-Link Rear Axle Truss reposition the frame-end control arm mounting points to relax suspension link angles
  • reduced NVH Easy-to-install Lower LCG Long Arm Brackets don?t hinder transfer case access Full range of movement for off-road flex
  • Beefs up Dana 30 or 44 front axle steering components Helps maximize steering component ground clearance Optimizes steering geometry for superior highway drivability
  • reduce body roll to for unsurpassed handling Pro LCG High Steer System (# 1849000) recommended on 4″+ lift – optional on 5″ lift LCG Long Control Arm Suspension Systems
  • LCG Long Arm Brackets
  • rear adjustable LCG Long Control Arm system Rear triangulated 4-link suspension eliminates rear track bar Adjustable LCG Long Control Arms & Brackets balance front caster angle
  • Optimize rear pinion angle
  • Adjustable anti-squat tunability to fine tune the suspension Complete front
  • Alpine Long Control Arms are constructed from durable 42mm x 4mm (upper) or 50mm x 5mm (lower) wall DOM tube for maximum strength On higher lifts
  • zero worries
  • Maximum ground clearance
  • increased on-road comfort
  • Alpine Long Arm Brackets are gusseted and reinforced for superior strength
  • center the axles to optimize vehicle roll center
  • articulation Fits all OEM axles including Dana 30
  • reduces bushing stress during extreme droop
SKU: FNNT-1249570 Category:

Description

TeraFlex LCG (Low Center-of-Gravity) Long Arm Suspension Systems are engineered for hardcore Jeepers who don’t want to give up on-road comfort and control in their TJ Wrangler/Unlimited. These complete systems include all necessary components including LCG Long Arm Brackets. Up front, the Pro LCG expands the performance of the stock 5-link suspension configuration with our adjustable LCG Long Control Arms & Brackets. Our Front Upper LCG Long Control Arms are more than 9" longer than stock! Around back, the stock 5-link rear suspension and track bar are replaced by our adjustable Pro LCG Triangulated 4-Link Long Control Arm Suspension w/ Rear Axle Truss & Brackets. The rear upper brackets feature adjustable anti-squat tunability to fine tune the suspension. Our adjustable LCG Long Control Arms balance front caster angle and pinion angles as well as optimize rear pinion angles, anti-squat geometry, and tire position on vehicles with 3-5" lifts. On higher lifts, LCG Long Arm Brackets and 4-Link Rear Axle Truss reposition the frame-end control arm mounting points to relax suspension link angles. This reduces bushing stress during extreme droop as well as shock load transferred through the LCG Long Control Arms. The High Steer HD Adjustable Front Track Bar, Drop Pitman Arm (4"+), and Rear Upper Pro LCG Triangulated 4-Link Control Arms improve steering response, center the axles to optimize vehicle roll center, and reduce body roll to for unsurpassed handling. This results in improved suspension geometry and relaxed control arm angles for a superior ride quality and performance regardless of terrain. These systems restore front and rear roll axis angles to minimize brake dive and acceleration squat. TeraFlex suspension systems provide reduced noise, vibration, and harshness (NVH). TeraFlex Pro LCG Long Arm Suspension Systems are the best of both worlds!

Additional Attributes:

GTIN: 00843885020455
Included Parts: 5″ Lift Coil Springs (Front: # 1843502 & Rear: # 1844502)
Included Parts0: 10″ Front Sway Bar Quick Disconnect Kit (3-6″ Lift) (# 1743090 – superseded by High Steer)
Included Parts1: 10.5 in. Rear Sway Bar Link Kit (2.5-5 in. Lift) (# 1944011)
Included Parts2: BellyUp Skid Plate Kit (# 4648403)
Included Parts3: HD Steering Box Skid Plate Kit (# 4627400)
Included Parts4: 2003-2006 TJ: 1″ Transfer Case Lowering Spacer Kit (# 1900103)
Included Parts5: 1997-2002 TJ: Shift Linkage Plate Kit (# 1900001)
Included Parts6: 2003-2006 TJ: Shift Linkage Plate Kit (# 1900003)
Included Parts7: 26″ Stainless-Steel Braided Brake Line Kit – Front & Rear (# 4350400)
Included Parts8: Exhaust Pipe Extension
Included Parts9: Shock Extension Kit – Rear Lower (# 1544790)
Included Parts: Pro LCG Long Control Arm & Bracket Kit – Front Upper (3-5″ Lift) (# 1443470)
Included Parts0: All necessary hardware
Included Parts1: And more
Included Parts2: 9550 VSS Twin-Tube Shock Kit (5-6″ Lift) (# 1549500)Pro LCG Dana 30/44 High Steer System (4-6″ Lift) (# 1849000):
Included Parts3: High Steer Knuckle (# 4828490)
Included Parts4: High Steer HD Aluminum Drag Link Kit w/ Stock Taper Tie Rod Ends (# 4920244)
Included Parts5: High Steer HD Aluminum Tie Rod Kit w/ Stock Taper Offset Tie Rod Ends (# 4920251)
Included Parts6: Drop Pitman Arm (3.5-6″ Lift) (# 1922133)
Included Parts7: High Steer Sway Bar Mount Kit (# 4959100)
Included Parts8: Steering Stabilizer Mount (# 1510090)
Included Parts9: 8″ Front Sway Bar Quick Disconnect Kit (0-2″ Lift) (# 1743092)Additional Components w/ High Steer System:
Included Parts: LCG Long Control Arm & Bracket Kit – Lower (3-5″ Lift) (# 1447700)
Included Parts0: High Steer HD Adjustable Front Track Bar (3.5-6″ Lift) (# 4923202)
Included Parts1: High Steer Front Track Bar Axle Bracket Kit (# 1943070)
Included Parts: Pro LCG 4-Link Long Control Arm & Bracket Kit – Rear Upper (3-5″ Lift) (# 1444870)
Included Parts: HD Adjustable Front Track Bar (3.5-6″ Lift) (# 1743070 – superseded w/ High Steer)
Included Parts: High Steer Front Track Bar Frame Bracket Kit (# 1743031)
Included Parts: Drop Pitman Arm (3.5-6″ Lift) (# 4922133 – included in High Steer)
Included Parts: 2.25″ Bump Stop Extension Kit – Front Upper (LCG Lift) (# 1910204)
Included Parts: 1.75″ Bump Stop Extension Kit – Rear Lower (LCG Lift) (# 1949011)
Install Time: 23 hours
Material: Steel, polyurethane, rubber
Prop 65 Yes/No: Yes

Extened Information:

Emissions : Emissions Compliance Exempt
Life Cycle Status: Available To Order

Packaging:

Quantity of Each: 1
Package UOM: EA

Additional information

Weight 205.03 lbs
Dimensions 48 × 40 × 20 in

Reviews

There are no reviews yet.

Be the first to review “TJ SWB: 5″ Pro LCG Long Arm Suspension System, High Steer & 9550 VSS Twin-Tube”