JK: Tera44 HD Wide Front Axle Housing – Bare (4-6″ Lift)
$3,097.99
-
Our Bare HD Front Axle Housings feature a heavy-duty housing with axle tubes. Requires new differential, ring & pinion, inner axle shafts, and bearings and install kit. Transfer your outer existing components to the new housing.
- 3.25 O.D. x 0.5″ wall extreme duty axle tube increases torsional strength to resist bending
- Reinforced front track bar mount (ties into spring pad) for greater strength
- UV protected triple-stage powder coat for corrosion resistance
- 1/4″-thick CNC laser cut axle brackets for extreme strength
- Integrated factory location upper control arm mount
- Pre-installed upper control arm bushings
- Proper pinion angle for lifted JK applications
- 4-6″ Lift features a raised pinion angle and raised track bar bracket (where applicable)
- Pre-tapped hole on spring perch for bump stop extensions
- Pre-drilled holes for limit straps and lower spring retainers
- Retains all JK ESP, ABS, and speedometer sensor capability
- Asymmetric housing design for extra-long tube side strength
- 100% engineered, designed, and built in the USA w/ new components
- 1-Year/Unlimited Mileage Warranty
- Pre-installed inner axle seals
- HD forged inner knuckles w/ greater upper and lower section strength
- Ductile cast iron housing w/ increased rib gussets
- HD ductile iron differential cover
- Smooth radius bottom design to glide over rocks and obstacles
- Integrated lower control arm skid plates
- High-flow oil passages and bottom oil drain hole for simple fluid changes
Description
TeraFlex HD Front Axle Housings are perfect for replacing bent, broken, or damaged axles in JK Wrangler/Unlimited vehicles including Rubicon models. Can also be used as a direct bolt-on upgrade for Jeep owners looking to beef up the stock axles? weak areas. Our Bare HD Front Axle Housings feature a heavy-duty housing with axle tubes, bracketry, and forged inner knuckles as well as pre-installed inner seals and upper control arm bushings. Transfer your existing outer components (stub shafts, knuckle assembly, ball joints, unit bearings, brakes, sensors) to the new housing! Requires new differential, ring and pinion, inner axle shafts, and bearings and install kit. These 70" wide front axle housings must be used with 70" wide rear axle housings such as our Tera CRD60 HD Wide Rear Axle Housings (w/ Semi-Float Axle Shafts or w/ Full-Float Axle Shafts).
Additional Attributes:
GTIN: 00843885043812
Included Parts: heavy-duty housing with axle tubes, bracketry, and forged inner knuckles as well as pre-installed inner seals and upper control arm bushings
Install Time: 8 hours
Prop 65 Yes/No: Yes
Extened Information:
Emissions : Emissions Compliance Exempt
Life Cycle Status: Available To Order
Packaging:
Quantity of Each: 1
Package UOM: EA
Fitment
Jeep | Wrangler | BASE | 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 |
Rubicon | 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 | ||
Sahara | 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 | ||
Sport | 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 | ||
Unlimited Rubicon | 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 | ||
Unlimited Sahara | 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 | ||
Unlimited Sport | 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 | ||
Unlimited X | 2007, 2008, 2009, 2010 | ||
X | 2007, 2008, 2009, 2010 | ||
Wrangler JK | BASE | 2018 | |
Rubicon | 2018 | ||
Sahara | 2018 | ||
Sport | 2018 | ||
Unlimited Rubicon | 2018 | ||
Unlimited Sahara | 2018 | ||
Unlimited Sport | 2018 |
Additional information
Weight | 113.4 lbs |
---|---|
Dimensions | 70 × 30 × 24 in |
You must be logged in to post a review.
Reviews
There are no reviews yet.